59
Experiment update. First experiment was to compare viscosity. Something else was learned. Both mine and the manufactured oils created a sticky surface on the oil paint. Reason for this is the way oil paint oxidizes. Two quickly and the underling paint stays wet. Leaving the surface sticky. This happens a lot with water soluble oil paints. Both the oil I made and the manufactured are not meant to be used by themselves. But have to be mix with treated linseed oil. Normally at a 3 or 4 to one ratio of refined linseed oil to thickened.
Timed experiment day two. The oil I made is drying the paint faster than the manufactured. With two of the five slow drying oil paints partially dry after 24 hours. This is a strait one to one ration of paint and thickened oil. After this test I'll have to make a mix of my treated oil to match the four to one mix of the manufactured oil I currently use. What I'm hoping for is my oil dries at or faster than the manufactured oil without leaving a sticky film.
I'm also playing No Man's Sky and trying not to think about my computer problem. Rained so I can't mow the lawn. Have to fix my living room ceiling fan. One of the blades have come loose from the motor housing.