Author Topic: Furtopia Shop (Read 9778 times)

Varg the wanderer · « **Reply #25 on:** December 10, 2003, 08:24:16 pm »

*pokes head out of welding booth*
What is going on?
*watches box burn and angery smarter man try and kick Da bear*
Oh Cool, just don't light the whole shop on fire. I remember what happened at school.

'>

Da_Bear · « **Reply #26 on:** December 10, 2003, 08:26:23 pm »

*yells across the shop*

I have no clue lobar. SOrry i cant help.

Well adamina, you took some weird drugs and you imagined some crazy stuff. Thanks for the starter. But we need to overhaul the engine its going to take awhile.

Adamina · « **Reply #27 on:** December 10, 2003, 08:29:59 pm »

*bling* here you go!

Varg the wanderer · « **Reply #28 on:** December 10, 2003, 08:35:19 pm »

Wire? Check the cart with all the spools on it. It's under the tarp in that corner over there
*points*
just wheell it over and attach the wire where you need it if you'r making what I think your making

Adamina · « **Reply #29 on:** December 10, 2003, 08:36:57 pm »

i have it right here...

WhiteShepherd · « **Reply #30 on:** December 10, 2003, 08:37:13 pm »

Finally comes inside. Was just getting to know the area. *tail wags and smiles* *Looks at Da Bear's car.* Going fuel injection or carburetor? What will be it's top speed?

Adamina · « **Reply #31 on:** December 10, 2003, 08:40:42 pm »

hehe! hey there, WS hows it goin?

Lobar · « **Reply #32 on:** December 10, 2003, 08:44:19 pm »

Thanks, Varg. *fetches a 1/4 mile of 16ga stainless steel wire, puts the end through the hole in the rod and bends it with a pair of pliers so it stays, and turns the lathe on a low speed and guides the wire into a coil around the rod*

Adamina · « **Reply #33 on:** December 10, 2003, 08:49:59 pm »

ahhh, must be going... feel free to stop by across the street... (tiki)

Varg the wanderer · « **Reply #34 on:** December 10, 2003, 08:50:01 pm »

* goes back to welding fan like thing to a very odd shaped cyindrical peice of metal*

Lobar · « **Reply #35 on:** December 10, 2003, 09:06:07 pm »

*As the wire reaches the other end of the rod, he turns off the lathe, and cuts where the wire passes through the hole with a pair of tin snips. He removes the rod from the chuck, slides the coil off the rod, then puts the rod back in the lathe and starts a new coil*

Hum hum...

Varg the wanderer · « **Reply #36 on:** December 10, 2003, 09:13:10 pm »

*finishes welding, places piece in corner, walks over to metal spinner and begins work on another peice*

Da_Bear · « **Reply #37 on:** December 10, 2003, 10:24:41 pm »

Its going to be carburetor. Holly four barrel.

*puts curtain around car. Loud noises and swearing can be heard. After hours of labor the curtain is pulled back*

It isnt much yet, i got the engine on there and its attached to the frame but i dont have a body yet. Ill work on it later. All i got is a seat , seat buckle, steering wheel, and the stick. Im getting some nice 20 inch rims with some perrelis(sp.) but i think its ready to race. If any one wants to bring their car or build one and race me I'll take you on anyday. Lets start this baby up and see what shes got.

*i push in the clutch, put it in nuetral, and turn the key. The engine starts with a load roar and begin to hum so smoothly that you can hear the vavles open and shut. I rev it to the red line as flames shoot out 20 feet of my dual exhaust.*

Well she red lines pretty low at 6400 rpm but ill take her out to the strip anways and see what shes got.

*takes it out to the street in front and Revs the engine loudly as i wait for people to gather*

Katra · « **Reply #38 on:** December 10, 2003, 10:37:14 pm »

*Takes some more lumber and constructs tables to put games on.*

*Takes empty cart out; returning a little later with another load of lumber.*

Varg the wanderer · « **Reply #39 on:** December 10, 2003, 10:39:00 pm »

I'll take you on in about a day or 2, ok Da Bear?

*goes back to spinning*

Murrg · « **Reply #40 on:** December 11, 2003, 12:56:09 am »

*walks in carring his armor finds a small hammer and begains worrking the dents out* Nice place varg

WhiteShepherd · « **Reply #41 on:** December 11, 2003, 03:26:33 am »

Adamina: Busy busy working but doing great and enjoying life. *tail wags and smiles shaking the fur my on my white body in a streach as I pick up the smells of variuos construction projects.

Turns towards the curtian Da Bear is working in. Nice! Some octane boster and a good muffler for your hearing. I bet that thing eats tires.

'>

Listens to Varg. A race! Who else is joining?

Varg the wanderer · « **Reply #42 on:** December 11, 2003, 09:38:59 pm »

*can be seen sleeping in the corner with various spun parts and the turbine laying around me*

ZZZZZZZZZZZZZZZZZZzzzzzzzzzzzzzz...

Lexington the wolf · « **Reply #43 on:** December 12, 2003, 10:41:03 am »

*Wakes up and stands up*

Wow, how long was I alseep?

*Looks around the shop*

Alot has happend here. I'm going to start a project of my own now.

*Gather all the biggest pices of metal and equipment and begins working*

Hehehe, this will be a suprise for everyone....

Varg the wanderer · « **Reply #44 on:** December 12, 2003, 05:21:25 pm »

*carries peices to table and begins to assemble them, refering to a big 3 ring binder every now and then*

dodgers · « **Reply #45 on:** December 12, 2003, 06:35:32 pm »

*walks in Sits in a corner of the shop all alone *

talking 2 himself , thinking of what 2 do

Adamina · « **Reply #46 on:** December 12, 2003, 08:04:27 pm »

hmmm... thats good, WS... i think ill start a project of my own... *grabs random parts and pulls up a chair to nearest taable* hmmm.. now what to make, what to make?

any ideas, anyone?

dodgers · « **Reply #47 on:** December 12, 2003, 08:54:59 pm »

* looks around 4 a bar *

*stay's in hes corner feeling depreased

Adamina · « **Reply #48 on:** December 12, 2003, 09:01:21 pm »

hey dodgers, theres a bar at my place... hint hint... (the tiki beach) sorry varg, by the way, but i need someone to come...

dodgers · « **Reply #49 on:** December 12, 2003, 09:11:01 pm »

thx i will be right over i need a dirnk